A saga of photos

So, the napkins are now off the loom. I've just pulled a (rather large) batch of photos off my camera, so I can now show what I've been doing over the last month. (Yes, I just discovered that some of the photos on my camera had been there for just over a month. I really don't know what I was thinking.)

First of all, the loom modifications. My table loom now has aprons at both front and back, which is (I think) the biggest thing I had planned to do. I've also added another hundred heddles, but that's not very exciting at all in pictures.


Secondly, the napkins. These are what was keeping me too busy to transfer photos for the last couple of weeks. Not sure what my excuse was before that...

These are a Christmas present, but I don't expect to have them hemmed and completely finished until the end of the year. That's fine by me, it's when I'll be seeing the recipient anyway. I finished them off in a fit of staying-up-too-late on Tuesday night. Most of the last one was very smooth - I was finally at the point where I was comfortably able to throw the (too short) stick shuttles through the shed relatively reliably. The last few inches were rather interesting though - I only just managed to squeeze it in. I was working with a teeny tiny shed (and having to manually push the heddle bars down), and it was right up against the reed - the one time that I have felt particularly grateful for having stick shuttles.


I had meant to have a photo of the back of the loom showing just how much warp was left, but I managed to fail to upload it. Needless to say, I physically could not wind it on any further (and that wasn't because I'd made the aprons too short).

The napkins are a summer and winter design. The blue weft doesn't cover as well as it should because it's the same thickness as everything else. The original plan was something entirely different that would have worked just fine with these thicknesses, so I thought I'd see how it went. I think it came out okay, but I'd probably use thicker pattern weft next time. These photos are before washing. You can see the markers I put in on the middle section so that I never had to count any higher than 20.



The sizes were not identical, but they were all within a couple of cm in length. Width before washing was 54cm, length ranged from 58-60cm. After washing they look like they're about 50cm wide and 53cm long, which should make them roughly square once they're hemmed.

I still have to catch up on blogging - I've got exchange towels to write about, and I've just discovered that the post that I wrote and thought I'd lost (about the warp weighted loom comparison) is not in fact lost, so I'll have to sort out all the photos that go with that too.

No idea what the next weaving project will be. I've nearly finished the scarf I was making for Christmas, and I'm not sure what the next project there will be either. The new loom will be being picked up after Christmas, and then I can see how long that takes to get sorted out - might be a while before I need to have a project planned. And in the meantime, I can always resurrect my warp weighted loom if I need a quick(?) fix:

It's only about 60cm high, and this warp has been languishing for quite a while. I need to find the ball of indigo dyed wool I was using for weft, which I think is why I stopped. I also stopped because it's just an annoying height to work at - I think I'll have to try putting it on a coffee table or something. Oh, and the orange thing hanging off the corner of the loom? That was the first thing I wove on it, a 2-1 twill bit of cloth, madder dyed. It was supposed to be a little hat, but it ended up being to small. It's probably going to turn into a bag eventually, but until then it's a decoration.

And a gratuitous close up, showing that the weaving is in fact a twill:

That's all I've done, and the warp is (probably) around 6m long. The weaving takes about 3-4 times as long as the table loom. It was my first attempt at a 2-2 twill on this loom, and I have to admit that making the heddles took me about three attempts before I got it to work nicely (and without mistakes). I like the flexibility of this loom - you can have as many heddle bars as you like, although too many is likely to drive you mad. But my favourite part is that you don't have to beam the warp, the tension takes care of itself quite nicely. Of course, the downside is that you have to keep moving the weights which can also get a bit tedious.

Making of Christmas stuff

For some reason I find myself trying to make a set of six napkins for Christmas, as well as knitting a scarf and possibly a pair of socks. The knitting is not implausible, since it's nice and portable. I hope to be nearly half done with the scarf by the end of today, and I only started it on Sunday night. The socks are still debatable, although I'll have to decide soon so I can buy the wool I want...

The napkins will be interesting though. I'm going away for Christmas - leaving home on the 21st, so that's my self imposed deadline. (I say self imposed because I don't think it will matter if I don't get them finished before New Years...). I just finished threading the loom last night, just needs tying to the front beam. I hope to get at least half a napkin woven tonight. I have a feeling I may be deluded in thinking I have any hope of doing this.

Project details:
420 ends, 18epi
Fairly plain summer and winter design, just with patterned borders. I'm vaguely considering doing a pickup motif in one corner on each napkin.
Warp is the same cotton I used to do the tea towels, wefts will be blue and natural cottolin. I'm not sure whether the pattern weft will be blue in all of them, or if I want to do some with the natural weft. I'm going to start with pattern weft blue, tabby weft natural though, and take it from there.

I think the (almost) 60cm width of these napkins is pretty close to the limit of what my table loom can handle. Luckily I've just bought a floor loom. I don't get to pick it up until Christmas though, and then I'll get to have fun working out what makes it tick. It's a 48" 8 shaft countermarche, and I've only seen one picture. It looked like what I was wanting though, so I gave into temptation.

And on the theme of looms, the aprons were attached before I started setting up for napkins. They're just stitched onto the beams through the holes that were already there, and are possibly not quite perfectly straight. I'll have to see how they behave when actually weaving, but tying onto the back beam was definitely more pleasant than without the apron.

I should have photos of various things, but they're still sitting on the camera. I expect I may not have time to do anything with them until holiday time, when there will be no loomy distraction...

Towels sent, loom mods under way

Towels got sent off on Thursday. I missed the cut-off date for overseas Christmas shipping, but I'm hoping it'll still get there in time anyway. I took more photos of them after I'd rewashed (to try to remove all traces of cat hair), but they're still on my camera.

I am making cloth aprons for my loom - the string was starting to drive me mad. So far I have canvas cut out, and the cut edge zigzagged. I've got some aluminium bar (which I also plan to make some warp sticks, and new lease sticks from), and have two pieces cut and drilled. Next I just need to put the canvas, bars and loom together in a way that actually works...

And just to make it all interesting I appear to be making a set of 6 napkins for Christmas presents, theoretically finishing within two weeks because that's when I'll be going away for Christmas. I think I've also managed to talk myself into knitting a lace scarf and quite possibly a pair of socks within the next two weeks too. Could be interesting.

Wickelbander off the loom

During the weekend I decided that I wouldn't get my weaving finished by Tuesday morning, so I didn't put too much effort in. Last night I decided that maybe I could do it... Four hours later I was cutting the 6-ish metres off the loom and giving it a bath. And now I am trying to drape it over things at work to get it dry without making it dirty (not so easy when you work in an office attached to a foundry...)

Using an eyeometer it looks like a fairly good replication. The new version feels stretchy, but possibly not as stretchy as the old version. This may just be wishful thinking though, since it's the result I was hoping for. When it's dry and I have space (and a tape measure on hand) I will test stretchiness, take photos, and compare weave density more closely. If they really are different then I might have to think about incarnation three - warp weighted horizontal loom. I'm not sure how well that will work with a table loom though, it seems like it would be a lot easier to set up on a floor loom.

Next table loom project is making a cloth apron for the back beam, my (somewhat bendy) stick tied on with string is starting to drive me batty...

Progress (and photos)

It turned out that my cold was actually a sinus infection (and probably caused by some sort of allergy that I never knew I had...). The result of all this was two weeks of being sick and not getting enough sleep, and therefore not getting much done. I've finally managed to get under way with not-quite-so-mindless stuff again, which is nice.

The madder dyeing was finally finished last Sunday. I'm not sure how much it was affected by the big delays between mordanting and batches of dyeing, but there is definitely some colour difference. In all three batches the first few are clearly lighter and then it gets rather hard to pick the order.

I think more time may have made more difference at the higher percentages of mordant, or possibly more madder (only used 50% of the dry wool weight).

I will get better photos when I have actually sorted them and twisted them into neat little skeinlets again.


I made the first modification to my loom in the weekend - I added a quick release cord so I can wind it on without having to get up. (It also means I can actually wind it on by just winding the cloth beam rather than having to unwind the warp beam by some arbitrary amount first).

It's the cord travelling from the back, and up to the top of the castle to avoid the beater. I did put an eye on the front too, but then I had to take it out again when I warped the loom (the raddle fits over the front of the loom). It seems to work reasonably well - it's an improvement on not having it, at least.

And I got a warp set up again. This time it's a wool/rayon blend (2 ply, one of each), set up in a rosepath pattern so I can just do pattern samples. I was foolish though, and went from memory in working out the width and sett and originally had it at 12 epi. After getting it all tied on and doing a bit of weaving I decided that it really was too loose. I then rechecked the wpi of the yarn, and discovered that I should have done it at 15 epi (which would have been easier to start with, since I have a 7.5 dpi reed). I resleyed, which took it down to around 7" wide, which I think is still wide enough for a couple of scarves although not as wide as I wanted it. And because I can't count I have one floating selvedge wound with the rest of the warp and the other one hanging off the back of the loom (conveniently tied to one of the weights from my warp weighted loom)


And here's a picture with it sett at 12 epi (just to prove that I really have done something)

I've now woven about 20cm of the first sampler - some of the patterns I made up didn't work so well, but it's all a learning experience (I think they really need a tabby to help them hold their shape)

The other problem I had with my entirely slapdash method of loom dressing was that I didn't actually measure the length, I just guessed that crossing the warping board once was close enough to a metre (it's a sampler, I didn't need a specific length). This has turned around to bite me in that I used up nearly all of the yarn I had (about 20m left), so I will need to order more if I want to use any as weft. And since I had planned to dye some with various types of dye to see what effects I could get from the wool/rayon difference I guess I will be getting more (maybe I'll do some small experiments first though). It's not really a problem, I think I wanted more anyway, and I have been very tempted by some of the other yarns from the same place...